 |
| RealGrass RG 53SB |
RealGrass 3-Blade Forrest Residential Landscape Artificial Turf
by RealGrass
Product FeaturesSize: 3.5-Ft. x 15-Ft.
|
Product Description
Size: 3.5-Ft. x 15-Ft.
From the Manufacturer
Artificial grass taken to a whole new level. RealGrass Artificial Turf has the look and feel of luxurious sod without the water, pesticides, fertilizers and maintenance.
Play hard or just sit back and enjoy this superb quality turf.
Real Grass has made it simple and affordable to have the look of real sod without any of the issues.
Pet owners will find that Real Grass Artificial Turf is a great choice for those problem side yards, dog runs and more.
Built to withstand the elements and feature a 5 year limited warranty. Take pride in this USA made product that will add curb appeal to any yard.
Enhance curb appeal, great for pets, easy pet clean up, Low maintenance, saves water.
You will need approximately 1.5 lbs of infill for every square foot of turf. This amount will vary according to variety of infill being used and desired appearance of blade exposure.
Place the infill material in the hopper of the spreader and set at about a five on the gauge (or medium open) on the hopper. This opening size will allow for a fair amount of infill to get into the fibers of the turf. Walk slowly behind the spreader allowing the infill to spread evenly on the turf. Generally, you will spread about 1/2 lb of infill per pass with the spreader. In between spreading the layers of infill, brush the turf fibers upright with a stiff bristled industrial broom or a power broom.
Do not "dump" the infill in large quantities on the turf, as it will be very difficult to get an even infill distribution, and you may bury the blades. The install nails should be spaced every 6-12 inches 1-inch away from the seam edges or as needed.
Also available in size 5x18 Feet
To see other synthetic grass options, go to Artificial Greens & Lawns.
No comments:
Post a Comment